RO Water Systems

FEATURES

• Sediment Filter: 5 Micron Sediment Filter that removes sediments and protects the system.
• High Pressure Pump: 1HP Motor Vertical Multi-Stage Pump with flow rate of 1080 Liters/H. High quality stainless steel Shimgi Pump for long-life usage.
• RO Membrane: One of the industry's leading brackish water RO elements - Vontron-4040.
• Membrane Housing: 4 duol 4.0" x 40" Stainless Steel Housing with 300PSI maximum operating pressure.
• Pressure Gauges: Glycerin Filled Gauges for monitoring the system's operating pressure and per liter operating pressures.
• Low Pressure Switch: Safety device to protect the pump from running dry when there is insufficient water feed pressure.
• Solenoid Valves: To assist with the on/off functionality of the system and automatic membrane flush.
• Flow Meters: One Product and One Waste Flow Meters - Enables operator to actuaUy adjust product to waste ratio and monitor system's performance.
• Regulator Valve: One Stainless Steel ANSI 316 Needle Valve - regulates the product to waste ratio (system's recovery).
• Micro-Computer Controller: A specialized controller designed by Purltech for commercial systems with automatic controls and TDS monitors.

OPTIONAL FEATURES:

• Stainless Steel Components: ANSI 304 and 316 can be used with solenoid valves and pumps for brackish water treatment.
• Concentrate Re-Circulation
• Automatlc Pre-treatment Systems
• Chemical Dosing Pumps

SPECIFICATION

• Capacity: 12000 GPD
• RO Membrane: 8 pcs
• RO Pump: 3HP
• Voltage/Hertz: 110V or 220V / 50Hz or 60Hz / Single phase or three phase
• Pipe Size: 3/4" Feed, 1/2" Permeate, 1/2" Concentrate, 1/2" Flush (BSP thread)

OPERATING PARAMETERS

• Operating Pressure: 180 PSI | Max. Feed TDS | 1000 ppm
• Normal Salt Rejection: 99% | Max. Feed Hardness | 15 ppm
• Minimum Salt Rejection: 96% | Feed pH Range | 3.0 - 10.0 ppm
• Operating Temperature: 20˚C - 45˚C | Free Residual Chlorine | 0.1 ppm
• Minimum Feed Pressure: 1.5Kg | Recovery Rate | 60% - 75%