Buy Our Wide Range Of RO Water Treatment Systems
Made For Africa

  • Best Quality Products


  • Training Offered


  • Designed to sell


Request a quote now!

Interested in one of our products

Click the button below to send us and email. Give us as much information as possible so we can call and email you back with data sheets and prices.

Get a Quote

3000 Liters Per Day Industrial Reverse Osmosis System

R 110,000.00

Excl. VAT @15%


  • Sediment Filter: 5 Micron Sediment Filter that removes sediments and protects the system.
  • High Pressure Pump: 1HP Motor Vertical Multi-Stage Pump with flow rate of 1080 Liters/H. High quality stainless steel Shimge Pump for long-life usage.
  • RO Membrane: One of the industry's leading brackish water RO elements - Vontron-8040.
  • Membrane Housing: 8.0" x 40" Ceramic Housing with 300PSI maximum operating pressure.
  • Pressure Gauges: Glycerin Filled Gauges for monitoring the system's operating pressure and per liter operating pressures.
  • Low Pressure Switch: Safety device to protect the pump from running dry when there is insufficient water feed pressure.
  • Solenoid Valves: To assist with the on/off functionality of the system and automatic membrane flush.
  • Flow Meters: One Product and One Waste Flow Meters - Enables operator to actuaUy adjust product to waste ratio and monitor system’s performance.
  • Regulator Valve: One Stainless Steel ANSI 316 Needle Valve - regulates the product to waste ratio (system's recovery).
  • Micro-Computer Controller: A specialized controller designed by Purltech for commercial systems with automatic controls and TDS monitors.


  • Stainless Steel Components: ANSI 304 and 316 can be used with solenoid valves and pumps for brackish water treatment.
  • Concentrate Re-Circulation
  • Automatlc Pre-treatment Systems
  • Chemical Dosing Pumps


  • Capacity: 18000 GPD
  • RO Membrane: 3 pcs
  • RO Pump: 3HP
  • Voltage/Hertz: 110V or 220V / 50Hz or 60Hz / Single phase or three phase
  • Pipe Size: 3/4" Feed, 1/2" Permeate, 1/2" Concentrate, 1/2" Flush (BSP thread)


  • Operating Pressure: 180 PSI | Max. Feed TDS | 1000 ppm
  • Normal Salt Rejection: 99% | Max. Feed Hardness | 15 ppm
  • Minimum Salt Rejection: 96% | Feed pH Range | 3.0 - 10.0 ppm
  • Operating Temperature: 20˚C - 45˚C | Free Residual Chlorine | 0.1 ppm
  • Minimum Feed Pressure: 1.5Kg | Recovery Rate | 60% - 75%